The E16 flashlight is designed with the extreme compact, EDC in mind and is only 2 inches in length with a 0.7 inch round body. This flashlight is powered by a single 16340 Li-ion battery (recommend ARB-L16-700UP) which delivers an amazing 700 lumens from its CREE XP-L Hi Neutral LED. A CR123A lithium battery can be used as a backup (300 max lumens). This flashlight looks beautiful, but its tough exterior is made of durable high-strength aluminum that is built to withstand the daily abuse everyday carry items endure. Additional features include four output levels, strobe, two-way pocket/body clip, magnetic tail, IP68 water/dustproof, two forms of lockout protection, and anti-roll/candle tail-stand capabilities.

Size:

Length: 2.0” (51mm)
Diameter: 0.7” (19mm)
Head: 0.8” (21mm)

Weight:

0.7 oz. (21g) excluding battery

Battery (not included):

One 16340 Li-ion battery or one CR123A battery

Included:

Keyring, lanyard, spare O-ring

Warranty:

Limited Lifetime Guarantee from Fenix Lighting US

Additional Features of the Fenix E16

• Uses Cree XP-L HI Neutral White LED with a lifespan of 50,000 hours
• Powered by one 16340 rechargeable Li-ion battery or one 3V CR123A Lithium battery (recommend ARB-L16-700UP)
• Digitally regulated output maintains constant brightness
• Magnetic Tail
• Stainless steel side switch operation (one-switch control)
• Two-way body/pocket clip
• Anti-roll design
• Capable of standing up securely on a flat surface to serve as a candle
• Low voltage reminder indicates when the battery replacement is needed
• Reverse polarity protection, to protect from improper battery installation
• Over-heat protection to avoid the high temperature of the surface
• Twist head to turn ON/OFF and select the brightness level
• Made of durable aircraft-grade aluminum
• Premium Type III hard-anodized anti-abrasive finish
• The unique optical lens coating process

Operating Instructions

On/Off

With the light unlocked, press and hold the side switch for 0.5s to turn on/off the light.

Output Selection

With the light switched on, single click the side switch to cycle through Low→Med→High→Turbo.

Strobe

With the light unlocked, press and hold the side switch for 1.2s to enter strobe mode, single-click the side switch again to turn back to general mode.

Electronic Lockout Function

Lock: With the light unlocked, press the side switch twice within 0.5s. The light will blink twice on Med to indicate locked status.

Unlock: With the light is locked, press the side switch twice within 0.5s. The light will be unlocked and activated on the last used brightness.

In locked status, clicking or pressing the switches will activate 2 one-second blinks to indicate locked status.

Physical Lockout Function

Rotate the two-way body clip to the right above of the side switch to avoid accidental activation, move the two-way body clip for normal use.

Intelligent Memory Circuit

The light memorizes the last selected brightness level in General mode. When turned on again the previously used brightness level will be recalled.

Overheat Protection

The light will accumulate a lot of heat when used on the Turbo output level for extended periods. The light will automatically step down by a few lumens to reduce the temperature. When the temperature is reduced, the Turbo output level can be reselected.

Low-voltage Warning

When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output mode, the flashlight blinks three times every five minutes to remind you to replace the battery. To ensure normal use, the flashlight will not turn off automatically and will work till the battery protection activates. Note: This only works with a 16340 Li-ion battery.

Battery Replacement

Unscrew the tail cap to insert the battery with the anode side (+) towards the light head, then screw the light head back on.

Usage and Maintenance

• Disassembling the sealed head can cause damage to the light and will void the warranty.
• Fenix recommends using an excellent quality battery.
• If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage or battery explosion.
• Lock the light or take out the battery to prevent accidental activation during storage or transportation. Recharge a stored battery every four months to maintain optimal battery performance.
• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare．
• Periodic cleaning of the battery contacts improves the lamp’s performance as dirty contacts may cause the lamp to flicker, shine intermittently, or even fail to illuminate for the following reasons:
  A: The battery needs replacing.
  Solution: Replace the battery (Ensure battery is inserted according to the manufacturer’s specifications).
  B: The threads, PCB board contact, or other contacts are dirty.
  Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don’t work, please contact your authorized distributor.

Included

E16 flashlight, Body clip, Lanyard, Spare O-ring, Keyring, User manual, Warranty card, Information leaflet

Warning

This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone’s eyes.